Thermal Deoiling of Evaporator Coils for Air Conditioners


A major Air Conditioning company needed an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent-based vapor degreasing line. Epcon had an initial meeting and proposed Thermal Clean technology. At the same time, Epcon provided a convincing argument and proof that Thermal Clean technology was the only solution to the problem. The technology being used over the years was a degreaser and the cost of cleaning these fins was millions of dollars a year for water, chemicals and the disposal.

At the same time, the costs of compliance with rules and regulations governing industrial hygiene, safety and the environment are forcing manufacturers to reevaluate cleaning methods. In aqueous cleaning and solvent-based cleaning there are not only costs associated with purchasing chemicals, but also disposal costs, high operation and maintenance costs and risk management costs. Thermal deoiling eliminates most of these costs.


Thermal Deoiling is a process that uses indirectly heated dry air to clean parts contaminated with oils or lubricants. No water, solvents or other chemicals are used. The basic thermal process is well known, having been used for many years in industrial operations that require clean, dry parts such as brazing, coating, soldering and plating. The difference between an Industrial Oven and a Thermal Deoiler is that the deoiler burns the oil vapor in a Thermal Oxidizer to provide clean, dry heat for the deoiling chamber. In effect, the oil itself is helping to clean the parts while it is being oxidized to carbon dioxide and water.

A natural gas fired burner in the Thermal Oxidizer provides the balance of the heat needed for complete destruction of the oil. Indirect heating avoids condensation of water or oil vapor in the deoiling chamber or on the parts.


Epcon Industrial Systems, LP of The Woodlands, Texas was contracted by the manufacturer to design and construct a waterless and solventless deoiling system to replace the solvent line in time to meet the deadline. The new system was to be a one-on-one replacement for the existing cleaning line in terms of production rate, configuration and parts carriers.

The installation of air curtains and careful placement of the return air plenums prevents vaporized oil from escaping the entry and exit vestibules. A programmable logic controller (PLC) serves as the operator interface. The operator is able to monitor and make changes to temperatures, fan speeds, motor actuated damper positions and alarms. The PLC also keeps running records of the data, which can be charted in graph form at any time.

In order to eliminate the vaporized oil (volatile organic compounds) a Thermal Oxidizer was added to the system. Operating at 1,500°F with a combustion chamber residence time of 1.0 second, vapor destruction removal efficiencies (DREs) of greater than 95% were demonstrated. Two stainless steel shell and tube heat exchangers were installed at the oxidizer’s exhaust. The primary exchanger heats ambient air, which supplies the heat to the deoiler chamber, and a secondary exchanger saves fuel by elevating the temperature of the exhausted oil vapor prior to its destruction in the combustion chamber. The combustion of the oil provides up to 1,000,000 Btu per hour of heat for the deoiler. No heat source other than the natural gas fired burner and the oil’s heat of combustion are needed for maintaining the required temperature for deoiling.


The operating cost of the system is now in thousands of dollars per year instead of millions of dollars per year.

There are several benefits of a Thermal Deoiler when compared to liquid deoiling. The transport, storage and handling of chemicals are eliminated. Industrial hygiene, safety and environmental issues are reduced to a minimum. Fugitive emissions are eliminated and air pollution is reduced to a minimum. Waste treatment and disposal are eliminated. Maintenance and operating costs are reduced. There is no contact of the parts with the products of combustion – they exit the deoiler clean and dry. In the case of the Air Conditioner equipment manufacturer, the deoiling system, which has been operating since December, 2009, has resulted in the substantial reduction of costs compared to the cost-intensive vapor degreasing line. The reduction of intangibles such as safety and industrial hygiene management costs is unknown, but probably significant.

Quality products require quality cleaning. Thermal Deoiling has been shown to be a viable, money saving technology when compared to other cleaning methods. Deoiler, oxidizer and heat exchanger configurations can be designed for almost any part size, production rate, VOC loading and operating temperature. Conveyorized and Batch systems are available.

Thermal deoilers for AC manufacturing example
Thermal deoilers for AC manufacturing example
Thermal deoilers for AC manufacturing example


“With thousands of installation worldwide and a growing list of happy customers there are many more examples that we would love to share with you. Please contact us to learn more about case studies which match up with your specific needs”

if you have specific expectations, get a detailed quote