Metal Finishing & Processing Archives - Custom Industrial Supplier

August 28, 2021
No Comments

Convection Oven and 45,000scfm RTO for a Paint Curing Application in a Metal Finishing Operation

Convection Oven and 45,000scfm RTO for a Paint Curing Application in a Metal Finishing Operation Home Project No 3159 Convection Oven and 45,000scfm RTO for a Paint Curing Application in a Metal Finishing Operation The Challenge A Metal Finishing Operation needed a new system for the curing of painted metal parts and eliminate the byproduct […]

August 28, 2021
No Comments

Metal Coil Coating Line with Oven and Oxidizer System, Heat Recovery and Advanced Air Handling Controls

Metal Coil Coating Line with Oven and Oxidizer System, Heat Recovery and Advanced Air Handling Controls Home Project No 3921 Metal Coil Coating Line with Oven and Oxidizer System, Heat Recovery and Advanced Air Handling Controls The Challenge A pioneer in the pre-painted metal coil market in Brazil, need to replace their 20+ year old […]

August 28, 2021
No Comments

Aerospace Batch Oven and Sophisticated Controls for the Uniform Curing of Metal Airplane Parts

Aerospace Batch Oven and Sophisticated Controls for the Uniform Curing of Metal Airplane Parts Home Project No 3147 Aerospace Batch Oven and Sophisticated Controls for the Uniform Curing of Metal Airplane Parts The Challenge A metal processing application for the aerospace industry was need and advanced design and control system for batch ovens equipped with […]

August 27, 2021
No Comments

55 Gallon Drum Line Equipped with Washlines, Ovens, Recuperative Thermal Oxidizer and Heat Recovery Methods

55 Gallon Drum Line Equipped with Washlines, Ovens, Recuperative Thermal Oxidizer and Heat Recovery Methods Home Project No 901 55 Gallon Drum Line Equipped with Washlines, Ovens, Recuperative Thermal Oxidizer and Heat Recovery Methods The Challenge A global German company, wanted to have a presence in the United States to manufacture 55 Gallon Drums. The […]

August 27, 2021
No Comments

Multiple Prime and Finishing Ovens with Air Handling System for Metal Coating Application

Multiple Prime and Finishing Ovens with Air Handling System for Metal Coating Application Home Project No 1930 Multiple Prime and Finishing Ovens with Air Handling System for Metal Coating Application The Challenge An international coating line builder, contacted Epcon regarding a new plant they were going to supply to their subsidiary in Shandong, China for […]

August 27, 2021
No Comments

Thermal Deoiler Replaces Liquid Based Degreaser for Automotive Parts Supplier

Thermal Deoiler Replaces Liquid Based Degreaser for Automotive Parts Supplier Home Project No 4108 Thermal Deoiler Replaces Liquid Based Degreaser for Automotive Parts Supplier The Challenge A major manufacturer of automobile air conditioners had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that […]

August 27, 2021
No Comments

Coil Coating Line with Regenerative Thermal Oxidizer and Multistage Heat Recovery

Coil Coating Line with Regenerative Thermal Oxidizer and Multistage Heat Recovery Home Project No 1150 Coil Coating Line with Regenerative Thermal Oxidizer and Multistage Heat Recovery The Challenge A Coil Coating operation utilized an old direct-fired afterburner and a portion of the exhausts gas to heat a 100’ long curing oven, operating at line speeds […]

August 27, 2021
No Comments

Integrated System with Prime and Finish Ovens, Thermal Oxidizer and Heat Recovery for a Coil Coating Application

Integrated System with Prime and Finish Ovens, Thermal Oxidizer and Heat Recovery for a Coil Coating Application Home Project No 1480 Integrated System with Prime and Finish Ovens, Thermal Oxidizer and Heat Recovery for a Coil Coating Application The Challenge Meeting current federal and state regulations can often compromise fuel costs and operational efficiency, leaving […]

August 27, 2021
No Comments

Integrated Oven & RTO for Metal Processing Application

Integrated Oven & RTO for Metal Processing Application Home Project No 3700 Integrated Oven & RTO for Metal Processing Application The Challenge A metal parts producer needed a new oven for the processing application as well as new air pollution control technology to ensure the new line was compliant with increasingly stringent EPA regulations. The […]

August 27, 2021
No Comments

Comprehensive Paint Coating System with 3-Can RTO, Multistage Heat Recovery, and Curing and Bake Ovens

Comprehensive Paint Coating System with 3-Can RTO, Multistage Heat Recovery, and Curing and Bake Ovens Home Project No 3136 Comprehensive Paint Coating System with 3-Can RTO, Multistage Heat Recovery, and Curing and Bake Ovens The Challenge In painting or coating industrial products, such as metal coils, pipes, drums and the like, it is well known […]

Tag: Metal Finishing & Processing

Convection Oven and 45,000scfm RTO for a Paint Curing Application in a Metal Finishing Operation

Metal Coil Coating Line with Oven and Oxidizer System, Heat Recovery and Advanced Air Handling Controls

Aerospace Batch Oven and Sophisticated Controls for the Uniform Curing of Metal Airplane Parts

55 Gallon Drum Line Equipped with Washlines, Ovens, Recuperative Thermal Oxidizer and Heat Recovery Methods

Multiple Prime and Finishing Ovens with Air Handling System for Metal Coating Application

Thermal Deoiler Replaces Liquid Based Degreaser for Automotive Parts Supplier

Coil Coating Line with Regenerative Thermal Oxidizer and Multistage Heat Recovery

Integrated System with Prime and Finish Ovens, Thermal Oxidizer and Heat Recovery for a Coil Coating Application

Integrated Oven & RTO for Metal Processing Application

Comprehensive Paint Coating System with 3-Can RTO, Multistage Heat Recovery, and Curing and Bake Ovens

Site map

Term of sale

Term of Purchase

Term of Use

Careers